Energizer 2103 Bedienungsanleitung PDF herunterladen (Seite 22)

2103 Modem Module

Section 2 Installation and Operation

2-6

2.5 Connecting to

Flowlink

After the 2103 is installed and the modem cable connected, you

need to establish that there is a modem at the site, by config-

uring the module in Isco’s Flowlink software.

Note

The 2103 Modem requires Flowlink 4.13 or later. Earlier ver-

sions do not support the modem.

Open Flowlink and go to the connect screen (Figure 2-3) by either

selecting it from the pull down menu or clicking on the Quick

Connect icon.

Figure 2-3 Flowlink Connect Screen

Make sure the Type is Direct, and click on the 2100 Instrument

icon to connect. The system will detect a new modem module, and

will display the Network Resolution screen (Figure 2-4).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 85 86

Keine Kommentare

Energizer 2103 Bedienungsanleitung Seite 22