Energizer 515 Betriebsanweisung PDF herunterladen (Seite 116)

1 Go to the PATTERNS OPTION screen.

Main > Basal > Patterns

2 Select On, then press ACT. The patterns feature is now on. Exit the menus.

Programming a pattern

Your pump will keep your pattern settings even when the Patterns option is turned off. However, the

patterns feature must be on to program a basal pattern.

To program your patterns, do these steps:

Go to the EDIT BASAL screen.

Main > Basal > Set/Edit Basal

2 Select the basal pattern you want to program, then press ACT.

3 The SET BASAL RATE 1 screen appears. The basal rate flashes, indicating that it can be changed. Set

your first rate, then press ACT.

The start time for your first basal rate is midnight and cannot be changed.

4 The SET START TIME 2 screen appears. The dashes under the screen name flash. The first basal rate is

now set.

If you want to use the same rate for the whole day, press ESC and skip to step 10. If you want to

program another basal rate, follow steps 5 through 8.

5 In the SET START TIME 2 screen enter the time of the day you want this basal rate to become active.

6 Press ACT. The SET BASAL RATE 2 screen appears.

7 The previously set basal rate or dashes flash on the screen. Select the value for this basal rate.

8 Press ACT. The SET START TIME 3 screen appears. The second basal rate is now set.

9 If you do not need to set up any more basal rates, press ESC. If you need to set up more basal rates,

repeat steps 5 through 8 above for each rate.

After you press ESC, the BASAL RATE screen appears. The screen will show:

• the current basal pattern and basal rate,

•time it started, and

• the 24-hour basal total.

After you make changes to a pattern, the pump will use that pattern as the current basal. Make sure

the basal you want is selected in the SELECT PATTERNS screen.

Optimizing pump therapy 101

Chapter 7

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 191 192

Keine Kommentare

Energizer 515 Betriebsanweisung Seite 116